DIO24-104 : 24 Bit Digital I/O Module for PC/104 Bus
Learn more about this product:
Ordering Information:
Stock Number: 100-7543
Typical Availability (low quantity): Stock - 2wk
| Qty. | 1-9 | 10-24 | 25-49 | 50-99 | 100-249 |
|---|---|---|---|---|---|
| $ ea. | 98.00 | 93.10 | 88.20 | 83.30 | 78.40 |
Visitors looking at this product
have also been interested in these items:
| IDC-STB | Screw-Terminal Boards |
| UTB-1 | Universal Terminal Board |
| XIO-RO8 | 8 Channel Relay Output Board |
| XIO-DI8 | 8 Channel Opto Input Board |
- 24 Individually programmable digital I/O channels
- High output current capability (85ma sink per channel)
- Input interrupt capability
- Output Read-Back status eases software development
- Directly connects to standard Solid State Relays Racks and peripheral devices
The DIO24 is a 24 bit input/output module
specifically designed to interface peripheral devices to PC/104
bus computers. All channels can be individually defined as
being an input or output through software. Each output stage is
capable of sourcing 2.5ma and sinking 85ma. The DIO24 occupies
four consecutive, 8-bit, I/O address spaces. The base address
can be set to any value between 0 and 1020 decimal. Any single
input channel can be configured to interrupt the host when that
channel changes state. The polarity can be set to either
direction and the transition is latched so that even short
duration pulses are captured. CMOS construction assures low
power consumption and greater noise immunity from external
electrical devices. The DIO24 interfaces to outside devices
through a single 50 conductor IDC connector. The pinout of this
connector is fully compatible with standard 8, 16 and 24
position solid state I/O module racks available from a variety
of third party vendors.